|
醫療級聚四氟乙烯,醫療級塑膠原料PTFE DeWAL D/W 201東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581 肖生
DeWAL D/W 201
聚四氟乙烯
DeWAL Industries
DW 201 is skived from a modified homopolymer PTFE (Dupont NXT70)resin containing a higher level of a fully fluorinated comonomer. The
incorporation of the comonomer yields a materail with improved electrical and physical properties. This film can be thermally bonded (fused) to
itself (625 - 650 degrees F). The modified homopolymer resin exhbits chemical resistance equivalent to that of homopolymer PTFE. Its tensile
strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE. Because of these properties
DW 201 is often a good substitute for melt processable films such as PFA. Product can be supplied etched for bonding.
DW 201 may be thermally fused to itself making possible the fabrication of structures used in medical applications, as well as other products
fabricated by thermally welding of films together. DW 201 can also be used as a high dieclectric strength fusible wrap in electrical and electronic
cable applications. It can be used as a bonding film in the ciruit board industry.
總體
材料狀態• 已商用：當前有效
供貨地區• 北美洲• 歐洲
性能特點• 均聚物• 良好的電氣性能• 耐化學性良好
用途• 薄膜
• 電氣/電子應用領域
• 電子電纜護套材料
• 醫療/護理領域的應用• 粘合
形式• 薄膜
物理性能額定值單位制
Thickness 12.7 到1020 nm
薄膜額定值單位制測試方法
抗張強度- MD (屈服) 41.4 MPa ASTM D882
伸長率- MD (斷裂) 500 % ASTM D882
熱性能額定值單位制
最高連續使用溫度260 °C
電氣性能額定值單位制測試方法
介電強度110 kV/mm ASTM D149
補充信息額定值單位制
Backing Material PTFE Film
Core ID 7.62 cm
Maximum Roll OD 356 mm
Width 6.35 到1270 mm
醫療級聚四氟乙烯,醫療級塑膠原料PTFE DeWAL D/W 201是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581 肖生
|
