|
醫療級ISO 10993共聚多酯,醫療級ISO 10993塑膠原料PETG Eastar™ 6763東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581 肖生
醫療級ISO 10993, USP 第VI類,醫療/護理用品,電子束消毒, 輻射消毒,眼鏡, 薄膜
Eastar™ 6763
共聚多酯
Eastman Chemical Company
Technical Data
產品說明
Meets ISO 10993 and/or USP Class VI biocompatibility requirement; Food Contact Status compliant.
Eastar™ Copolyester 6763 is a clear, amorphous material that can be molded and extruded with ease. Its excellent performance properties include clarity, toughness, good melt strength, no dusting, no stress whitening, good heat sealability, easy cutting and thermoforming. Eastar™ Copolyester 6763 may be colored using color concentrates, dry colors, or liquid colorants. Eastar™ Copolyester 6763 can be safely sterilized with proper ethylene oxide, radiation, or electron beam methods without property loss or color shift. It is well suited for a variety of applications including, medical packaging, cosmetics and personal care packaging, food and beverage packaging, and display & signs.
In medical applications Eastar™ coplyester 6763 provides:
• Superior, long-term clarity provides easy identification of instruments
• Excellent puncture resistance and impact toughness ensure package integrity
• Excellent ability to be subjected to several methods of sterilization, providing flexibility and security to the device manufacturer
• Excellent optical and physical property stability post sterilization
• Good melt strength offers wide processing latitude and ease in thermoforming
The production and trimming of rigid medical trays made from sheet of Eastar™ copolyester 6763 results in little or no dust or particulates. After the thermoformed trays are made, they are put in polybags. The polybags of trays are then placed in protective boxes for storage or shipment. As long as the polybags in the protective boxes are intact and no outside contamination is evident, the thermoformer or medical device manufacturer should not need to clean the tray prior to packaging a device and sealing the package. If contamination is found on the medical trays and cleaning is required, use a lint-free towel. Blowing the tray out with filtered, deionized, non-lubricated air is also acceptable, assuming this does not stir up dust from the surrounding area. Using alcohol, which could cause crazing, or water, which would not evaporate, is not recommended.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED
The GREENGUARD INDOOR AIR QUALITY CERTIFIED Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
This product has been CRADLE TO CRADLE CERTIFIED Silver.
The CRADLE TO CRADLE CERTIFIED Mark is a registered certification mark used under license through McDonough Braungart Design Chemistry (MBDC). MBDC is a global sustainability consulting and product certification firm. The CRADLE TO CRADLE framework moves beyond the traditional goal of reducing the negative impacts of commerce (‘eco-efficiency'), to a new paradigm of increasing its positive impacts (‘eco-effectiveness'). At its core, Cradle to Cradle design perceives the safe and productive processes of nature's ‘biological metabolism' as a model for developing a ‘technical metabolism' flow of industrial materials. Product components can be designed for continuous recovery and reutilization as biological and technical nutrients within these metabolisms. For more information about MBDC and to obtain printable certificates for Eastman Copolyesters, visit www.mbdc.com. Choose Eastman Chemical Company under Company Name in C2C Certified products to display a list of our products.
總體
材料狀態 • 已商用：當前有效
資料 1 • Technical Datasheet (English)
UL 黃卡 2 • E118289-101981969
搜索 UL 黃卡 • Eastman Chemical Company
• Eastar™
供貨地區 • 北美洲 • 拉丁美洲 • 亞太地區
• 非洲和中東 • 歐洲
• 電子束消毒 • 良好的熔體強度 • 食品接觸的合規性
特性 • 輻射消毒 • 良好的著色性
• 好的消毒性 • 清晰度，高 • 無定形的
• 抗穿孔性 • 韌性良好
• 包裝 • 家具 • 體育用品
• 包裝，化妝品 • 片材
• 玩具
• 薄壁包裝 • 容器
用途 • 文具
• 薄膜 • 實驗室器具
• 醫療/護理用品
• 層壓板 • 食品包裝
• 醫用包裝
• 電氣/電子應用領域 • 收縮性薄膜
機構評級 • ISO 10993 • USP 第VI類
Eastar™ 6763
共聚多酯
Eastman Chemical Company
總體
外觀 • 清晰/透明
形式 • 粒子
加工方法 • 薄膜擠出 • 片材擠出成型
物理性能 額定值(英制) 額定值(公制) 測試方法
比重
-- 1.27 1.27g/cm³ ASTM D792
73°F (23°C) 1.27g/cm³ 1.27g/cm³ ISO 1183/D
-- 1.27g/cm³ 1.27g/cm³ ASTM D1505
吸水率 (73°F (23°C), 24 hr) 0.13% 0.13% ASTM D570
ISO 62
機械性能 額定值(英制) 額定值(公制) 測試方法
拉伸模量 (73°F (23°C)) 305000psi 2100MPa ASTM D638
ISO 527-2
抗張強度 ASTM D638
屈服, 73°F (23°C) 7250psi 50.0MPa ISO 527-2
斷裂, 73°F (23°C) 4060psi 28.0MPa
伸長率
斷裂, 73°F (23°C) 130% 130% ASTM D638
斷裂, 73°F (23°C) 100% 100% ISO 527-2
彎曲模量
73°F (23°C) 305000psi 2100MPa ASTM D790
73°F (23°C) 290000psi 2000MPa ISO 178
彎曲應力
73°F (23°C) 9860psi 68.0MPa ISO 178
屈服, 73°F (23°C) 10200psi 70.0MPa ASTM D790
撕裂阻力 ASTM D2582
MD : 73°F (23°C), 9.8 mil (250.0 µm) 93N 93N
TD : 73°F (23°C), 9.8 mil (250.0 µm) 93N 93N
薄膜 額定值(英制) 額定值(公制) 測試方法
薄膜厚度 - 經測試 9.8mil 250µm
割線模量 ASTM D882
MD : 9.8 mil (250 µm) 276000psi 1900MPa
TD : 9.8 mil (250 µm) 276000psi 1900MPa
抗張強度 ASTM D882
MD : 屈服, 9.8 mil (250 µm) 7540psi 52.0MPa
TD : 屈服, 9.8 mil (250 µm) 7540psi 52.0MPa
MD : 斷裂, 9.8 mil (250 µm) 8560psi 59.0MPa
TD : 斷裂, 9.8 mil (250 µm) 7980psi 55.0MPa
伸長率 ASTM D882
MD : 屈服, 9.8 mil (250 µm) 4.0% 4.0%
TD : 屈服, 9.8 mil (250 µm) 4.0% 4.0%
MD : 斷裂, 9.8 mil (250 µm) 400% 400%
TD : 斷裂, 9.8 mil (250 µm) 400% 400%
落錘沖擊 4 ASTM D1709A
0°F (-18°C), 9.8 mil (250 µm) 500g 500g
73°F (23°C), 9.8 mil (250 µm) 400g 400g
埃爾曼多夫抗撕強度 ASTM D1922
MD : 9.8 mil (250 µm) 1400g 1400g
TD : 9.8 mil (250 µm) 1700g 1700g
褲型撕裂耐性 5 ISO 6383-1
MD 206lbf/in 36.0N/mm
TD 206lbf/in 36.0N/mm
Eastar™ 6763
共聚多酯
Eastman Chemical Company
薄膜 額定值(英制) 額定值(公制) 測試方法
透氧率 (73°F (23°C), 9.8 mil (250 µm), 50% RH) cm³•mil/100in²/at cm³•mm/m²/atm/ ASTM D3985
25m/24 hr 1024 hr
水氣透過率 ASTM F1249
100°F (38°C), 100% RH, 9.8 mil (250 µm) 0.45g/100 in²/24 hr 7.0g/m²/24 hr
Carbon Dioxide Permeability ASTM D1434
73°F (23°C), 9.8 mil (250.0 µm) cm³•mil/100in²/at cm³•mm/m²/atm/
120m/24 hr 4924 hr
抗撕裂蔓延性 6 ASTM D1938
MD : 73°F (23°C), 9.8 mil (250.0 µm) 210lbf/in 36kN/m
TD : 73°F (23°C), 9.8 mil (250.0 µm) 210lbf/in 36kN/m
沖擊性能 額定值(英制) 額定值(公制) 測試方法
懸壁梁缺口沖擊強度
-40°F (-40°C) 0.69ft•lb/in 37J/m ASTM D256
73°F (23°C) 1.9ft•lb/in 100J/m ASTM D256
-40°F (-40°C) 2.0ft•lb/in² 4.2kJ/m² ISO 180/1A
73°F (23°C) 3.0ft•lb/in² 6.2kJ/m² ISO 180/1A
無缺口懸臂梁沖擊
-40°F (-40°C), 0.126 in (3.20 mm) 無斷裂 無斷裂 ASTM D4218
-22°F (-30°C), 0.126 in (3.20 mm) 無斷裂 無斷裂 ASTM D4218
-4°F (-20°C), 0.126 in (3.20 mm) 無斷裂 無斷裂 ASTM D4218
73°F (23°C), 0.126 in (3.20 mm) 無斷裂 無斷裂 ASTM D4218
-40°F (-40°C) 7 無斷裂 無斷裂 ISO 180/1U
-22°F (-30°C) 7 無斷裂 無斷裂 ISO 180/1U
-4°F (-20°C) 7 無斷裂 無斷裂 ISO 180/1U
73°F (23°C) 7 無斷裂 無斷裂 ISO 180/1U
裝有測量儀表的落鏢沖擊
-40°F (-40°C), 0.0984 in (2.50 mm), Energy at 363in•lb 41.0J ASTM D3763
Peak Load
-40°F (-40°C), 0.126 in (3.20 mm), Energy at 443in•lb 50.0J ASTM D3763
Peak Load
73°F (23°C), 0.0984 in (2.50 mm), Energy at 248in•lb 28.0J ASTM D3763
Peak Load
73°F (23°C), 0.126 in (3.20 mm), Energy at 292in•lb 33.0J ASTM D3763
Peak Load
-40°F (-40°C), 0.0984 in (2.50 mm), 25.8ft•lb 35.0J ISO 6603-2
能量到力量峰值 8, 9
-40°F (-40°C), 0.126 in (3.20 mm), 26.6ft•lb 36.0J ISO 6603-2
能量到力量峰值 8, 9
73°F (23°C), 0.0984 in (2.50 mm), 29.5ft•lb 40.0J ISO 6603-2
能量到力量峰值 8, 9
73°F (23°C), 0.126 in (3.20 mm), 32.5ft•lb 44.0J ISO 6603-2
能量到力量峰值 8, 9
硬度 額定值(英制) 額定值(公制) 測試方法
洛氏硬度
R 級, 73°F (23°C) 106 106 ASTM D785
R 計秤, 73°F (23°C) 109 109 ISO 2039-2
熱性能 額定值(英制) 額定值(公制) 測試方法
載荷下熱變形溫度 ASTM D648
66 psi (0.45 MPa), 未退火 158°F 70.0°C
264 psi (1.8 MPa), 未退火 147°F 64.0°C
玻璃轉化溫度 176°F 80.0°C DSC
維卡軟化溫度 185°F 85.0°C ASTM D1525
線形熱膨脹系數 - 流動 2.8E-5in/in/°F 5.1E-5cm/cm/°C ASTM D696
(-22 到 104°F (-30 到 40°C))
Eastar™ 6763
共聚多酯
Eastman Chemical Company
熱性能 額定值(英制) 額定值(公制) 測試方法
比熱 DSC
140°F (60°C) 0.311Btu/lb/°F 1300J/kg/°C
212°F (100°C) 0.421Btu/lb/°F 1760J/kg/°C
302°F (150°C) 0.449Btu/lb/°F 1880J/kg/°C
392°F (200°C) 0.471Btu/lb/°F 1970J/kg/°C
482°F (250°C) 0.490Btu/lb/°F 2050J/kg/°C
導熱系數 (73°F (23°C)) 1.5Btu•in/hr/ft²/°F 0.21W/m/K ASTM C177
電氣性能 額定值(英制) 額定值(公制) 測試方法
介電強度 10 (73°F (23°C)) 410V/mil 16kV/mm ASTM D149
介電常數 ASTM D150
73°F (23°C), 1 kHz 2.60 2.60
73°F (23°C), 1 MHz 2.40 2.40
耗散因數 ASTM D150
73°F (23°C), 1 kHz 5.0E-3 5.0E-3
73°F (23°C), 1 MHz 0.020 0.020
耐電弧性 158sec 158sec ASTM D495
光學性能 額定值(英制) 額定值(公制) 測試方法
光澤度 (45°, 9.84 mil (250 µm)) 108 108 ASTM D2457
透射率 ASTM D1003
常規, 9.84 mil (250 µm) 89.0% 89.0%
總計, 9.84 mil (250 µm) 91.0% 91.0%
透明度 (9.84 mil (250 µm)) 85.0 85.0 ASTM D1746
霧度 (9.84 mil (250 µm)) 0.80% 0.80% ASTM D1003
醫療級ISO 10993共聚多酯,醫療級ISO 10993塑膠原料PETG Eastar™ 6763是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581 肖生
|
